Chapter 4 Security Setup
Setting Up EAP Authentication
4-20
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-03
through the access point, you should also select
Network-EAP
. See the
“Setting
Up EAP Authentication” section on page 4-20
for details on the Require EAP and
Network-EAP settings.
Step 4
Click
OK
. You return automatically to the Security Setup page.
Setting Up EAP Authentication
During EAP authentication, the access point relays authentication messages
between the RADIUS server on your network and the authenticating client device.
This section provides instructions for:
•
Enabling EAP on the Access Point
•
Enabling EAP in Cisco Secure ACS
•
Setting up a Repeater Access Point as a LEAP Client
Enabling EAP on the Access Point
You use the Authenticator Configuration page and the AP Radio Data Encryption
pages to set up and enable EAP authentication. The internal radio and the radio
module both have an AP Radio Data Encryption page. Both pages contain the
same settings.
Figure 4-6
shows the AP Radio Data Encryption page for the
internal radio.
Figure 4-8
shows the Authenticator Configuration page.
