4-21
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-03
Chapter 4 Security Setup
Setting Up EAP Authentication
Figure 4-8
Authenticator Configuration Page
Follow this link path to reach the Authenticator Configuration page:
1.
On the Summary Status page, click
Setup
.
2.
On the Setup page, click
Security
.
3.
On the Security Setup page, click
Authentication Server
.
Follow these steps to enable EAP on the access point:
Step 1
Follow the link path to the Authenticator Configuration page.
You can configure up to four servers for authentication services, so you can set up
backup authenticators. If you set up more than one server for the same service, the
server first in the list is the primary server for that service, and the others are used
in list order when the previous server times out.
Note
You can use the same server for both EAP authentication and MAC-address
authentication.
