Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual Download Page 14

Page: 14 / 122

1-2

Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0

OL-11560-01 Rev. B0

Chapter 1 An Overview of the Conference Station

Understanding the Conference Station

Figure 1-1

shows the main components of the conference station.

Figure 1-1

Cisco Unified IP Conference Station 7937G

LED indicators

Three multi-color LED indicators provide call status information:

•

Off: Ready, Call State Off

•

Solid amber: Powering On

•

Solid red: Powering On, Mute, or Voice Message

•

Flashing red: Hold

•

Solid green: Dial Tone, Dialing, or Connected

•

Flashing green: Incoming Call (Ringing/Connecting), or Receiving

Microphones

Three internal unidirectional microphones.

Speaker

Internal speaker.

Navigation buttons
(four)

Allow you to scroll through menus and highlight items.

185261

Summary of Contents for 7937G - Unified IP Conference Station VoIP Phone



























































































































Search results

Summary of Contents for 7937G - Unified IP Conference Station VoIP Phone

Reviews:

Related manuals for 7937G - Unified IP Conference Station VoIP Phone

Brands by name

Popular brands

Cisco 7937G - Unified IP Conference Station VoIP Phone, Administration Manual

Search results

Summary of Contents for 7937G - Unified IP Conference Station VoIP Phone

Reviews:

Related manuals for 7937G - Unified IP Conference Station VoIP Phone

Brands by name

Popular brands