Cisco 7937G - Unified IP Conference Station VoIP Phone Administration Manual Download Page 76

Page: 76 / 122

7-2

Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0

OL-11560-01 Rev. B0

Chapter 7 Viewing Model Information, Status, and Statistics on the Conference Station

Status Menu

•

BootROM Version—Identifier of the factory-installed load running on the conference station.

•

App Load ID—Identifies the firmware running on the conference station.

To display the Model Information screen, choose

Applications

Settings

Model Information.

exit the Model Information screen, press

Exit

Status Menu

The Status menu includes these options, which provide information about the conference station and its
operation:

•

Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the

“Network Statistics Screen” section on page 7-2

•

Call Statistics—Displays information about the last call on the conference station. For more
information, see the

“Call Statistics Screen” section on page 7-4

•

Device Information—Displays device settings and related information for the conference station.
For more information, see the

“Device Information Screen” section on page 7-5

Note

The Status menu also contains a Ping menu that allows you to test network connectivity to another
conference station. For more information, see the

“Using Ping” section on page 9-2

To display the Status menu, choose

Applications

Settings

Status.

To exit the Status menu, press

Exit

Network Statistics Screen

The Network Statistics screen displays information about the conference station and network
performance.

Table 7-1

describes the information that appears in this screen.

To display the Network Statistics screen, choose

Applications

Settings

Status

Network Statistics

To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press

Clear

. To exit the

Network Statistics screen, press

Exit

Table 7-1

Network Statistics Items

Item

Description

Rx Frames

Number of packets received by the conference station.

Tx Frames

Number of packets transmitted by the conference station.

Rx error

Total number of FCS error packets or Align error packets received.

Rx PacketNoDes

Total number of shed packets caused by no DMA descriptor.

Rx Overruns

Total number of received packets dropped because of buffer overruns.

Rx alignErr

Total number of packets received between 64 and 1522 bytes in length that
have bad FCS errors.

Rx length error

Number of packets discorded due to improper length.

Summary of Contents for 7937G - Unified IP Conference Station VoIP Phone



























































































































Search results

Summary of Contents for 7937G - Unified IP Conference Station VoIP Phone

Reviews:

Related manuals for 7937G - Unified IP Conference Station VoIP Phone

Brands by name

Popular brands

Cisco 7937G - Unified IP Conference Station VoIP Phone, Administration Manual

Search results

Summary of Contents for 7937G - Unified IP Conference Station VoIP Phone

Reviews:

Related manuals for 7937G - Unified IP Conference Station VoIP Phone

Brands by name

Popular brands