4-4
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 4 Configuring Settings on the Conference Station
Overview of Options Configurable from a Conference Station
Related Topics
•
Displaying a Configuration Menu, page 4-2
•
Unlocking and Locking Options, page 4-3
•
Overview of Options Configurable from a Conference Station, page 4-4
•
Network Configuration Menu, page 4-5
•
Device Configuration Menu, page 4-8
•
Security Configuration Menu, page 4-12
Overview of Options Configurable from a Conference Station
The settings that you can change on a conference station fall into several categories, as shown in
Table 4-1
and
Table 4-2
. For a detailed explanation of each setting and instructions for changing them,
see the
“Network Configuration Menu” section on page 4-5
and the
“Security Configuration Menu”
section on page 4-12
.
Note
There are certain options on the Network Configuration menu, Device Configuration menu, and
Security Configuration menu that are for display only or that you can configure from
Cisco Unified Communications Manager. These options are also described in the
“Network
Configuration Menu” section on page 4-5
, the
“Device Configuration Menu” section on page 4-8
, and
the
“Security Configuration Menu” section on page 4-12
.
Table 4-1
Network Settings Configurable from the Conference Station
Category
Description
Network Configuration Menu Option
DHCP settings
Dynamic Host Configuration Protocol (DHCP)
automatically assigns IP addresses to devices when you
connect them to the network. Conference stations enable
DHCP by default.
DHCP Enabled
IP settings
If you do not use DHCP in your network, you can configure
IP settings manually.
IP Address
Subnet Mask
Default Router 1
Domain Name
DNS Server 1-5
MAC Address
Port settings
Allow you to set the speed and duplex of the network port.
Ethernet Configuration
TFTP settings
If you do not use DHCP to direct the conference station to a
TFTP server, you must manually assign a TFTP server. You
can also assign an alternate TFTP server to use instead of the
one assigned by DHCP.
TFTP Server 1
Alternate TFTP
TFTP Server 2
VLAN settings
Operational VLAN ID allows you to change the
administrative VLAN used by the conference station.
Admin. VLAN ID allows you to assign a VLAN ID
manually.
Operational VLAN ID
Admin. VLAN ID
