Cisco 700 series, Installation Manual

Page: 61 / 118

ISDN and Analog Telephone Devices 4-13
Call Forwarding Busy
Activation: *67* forwarded-to number#
Deactivation: #67#
The switch type NET3 supports these features where the country group must be set for
Sweden and Finland.
There is no equivalent command-line command to activate or deactivate Call Forwarding.
The phone number to which calls are redirected is not displayed.
All types of Call Forwarding supplementary services must be provisioned on the ISDN line
for the service to be available.
Where To Go From Here
If your router has been preconfigured, there is nothing more to do except power on the
router.
If you are using the Cisco 700 Fast Step Setup application to configure your router, it
includes steps to configure the digital and analog devices attached to your router. Cisco 700
Fast Step applications are on the CD-ROM inside the
Cisco 700 Quick Reference Guide .
If you are an experienced user and want to use the command-line interface (CLI) to
configure the digital and analog devices or have been instructed to do so, refer to the
Cisco 700 Series Command Reference for a list of the commands and some configuration
examples. The Cisco 700 Series Command Reference is on the Documentation CD.