manualshive.com logo in svg

Cisco 3200 Series, Software Configuration Manual

The Siemens 3200 Series is a versatile and high-performance product designed to meet your needs. Find the user manual for this exceptional device with ease at our website, where you can download it for free. Unlock the full potential of your Siemens 3200 Series by accessing the manual at manualshive.com.

Share
Download
background image

xix

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

  Related Documentation

Related Documentation

You can access these documents on the Documentation page on Cisco Connection Online (CCO) at 
www.cisco.com. The following documentation is available at the 

http://www.cisco.com/en/US/products/hw/routers/ps272/tsd_products_support_series_home.html

 

URL:

  •

Release Notes for the Cisco 3200 Series Mobile Access Routers

—Provides information on accessing 

documentation and technical assistance for the Cisco 3200 Series wireless and mobile router.

  •

Cisco IOS Command Reference for Cisco Access Points and Bridges

1

—New and revised Cisco IOS 

commands for the radio ports provided on the Wireless Mobile Interface Card (WMIC).

  •

Cisco 3200 Series Wireless MIC Software Configuration Guide

1

—Example procedures for using the 

IOS commands to configure the Wireless Mobile Interface Card (WMIC).

  •

Configuration Guide for the Cisco 3200 Series Mobile Access Router

1

—Example procedures for 

using the IOS commands to configure assembled Cisco 3200 Series routers.

  •

Cisco 3200 Series Mobile Access Router Hardware Reference

1

—This document. It provides 

descriptions of the Cisco MIC I/O cards found in Cisco 3200 Series routers.

  •

Cisco 3200 Series Mobile Access Router Reference Sell Document

1

—An overview of the reference 

sell program and components for the Cisco 3200 Series router.

The Release Notes for the Cisco 3250 Mobile Router

 lists the enhancements to and caveats for Cisco IOS 

releases as they relate to the Cisco 3200 Series router can be found at:

http://www.cisco.com/en/US/products/sw/iosswrel/products_ios_cisco_ios_software_releases.html 

or

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_ios_releases_home.html

1. 

Also available on the platform-specific CD-ROM.

This feature adds support for RFC 2006 Set operations and security violation traps. For specifications, 
see RFC 2006, 

The Definitions of Managed Objects for IP Mobility Support Using SMIv2.

For information about using Cisco IOS software to configure SNMP, refer to the following documents:

  •

The “Configuring SNMP Support” chapter of the 

Cisco IOS Configuration Fundamentals 

Configuration Guide,

 Release 12.2 

  •

The “SNMP Commands” chapter of the 

Cisco IOS Configuration Fundamentals Command 

Reference,

 Release 12.2 

For information about using Cisco IOS software to configure SNMP MIB features, refer to the 
appropriate documentation for your network management system.

For information on configuring Mobile IP using Cisco IOS software, refer to the following documents:

  •

The “Configuring Mobile IP” chapter of the 

Cisco IOS IP Configuration Guide,

 Release 12.2 

  •

The “Mobile IP Commands” chapter of the 

Cisco IOS IP Command Reference, Volume 1 of 3: 

Addressing and Services, 

Release 12.2 

Related documents from the Cisco TAC Web pages include:

  •

Antenna Cabling 

(http://www.cisco.com/warp/public/102/wlan/antcable.html)

Summary of Contents for 3200 Series



























































































































































































































































































































Reviews:

No comments

Related manuals for 3200 Series

VCON Escort Installation And Setup Manual preview
Escort
Brand: VCON Pages: 66
JBL Authentics L8 Owner'S Manual preview
Authentics L8
Brand: JBL Pages: 16
JBL Authentics L 16 Owner'S Manual preview
Authentics L 16
Brand: JBL Pages: 17
Magnavox AZ8350 - Cd Radio Cass Recorder Operating Instructions Manual preview
AZ8350 - Cd Radio Cass Recorder
Brand: Magnavox Pages: 18
Subpac M2X Manual preview
M2X
Brand: Subpac Pages: 15
Talk To Me Technologies eyespeak zuvo 12-D User Manual preview
eyespeak zuvo 12-D
Brand: Talk To Me Technologies Pages: 28
Becker Audio 30 Export 3301 Service Manual preview
Audio 30 Export 3301
Brand: Becker Pages: 92
BFT MICHELANGELO BT A 60 Installation And User Manual preview
MICHELANGELO BT A 60
Brand: BFT Pages: 84
GE 99004 User Manual preview
99004
Brand: GE Pages: 8
GE SC 7300 Use And Care Manual preview
SC 7300
Brand: GE Pages: 12
Lars Thrane IRIDIUM CERTUS 100 Quick Start Manual preview
IRIDIUM CERTUS 100
Brand: Lars Thrane Pages: 4
Sharp XL-S10H Service Manual preview
XL-S10H
Brand: Sharp Pages: 23
Kenwood K-525 Instruction Manual preview
K-525
Brand: Kenwood Pages: 27
Kenwood KD-491FC Instruction Manual preview
KD-491FC
Brand: Kenwood Pages: 12
Kenwood HM-DV77 Instruction Manual preview
HM-DV77
Brand: Kenwood Pages: 2
Kenwood HM-537WM Instruction Manual preview
HM-537WM
Brand: Kenwood Pages: 24
Kenwood K-511USB Instruction Manual preview
K-511USB
Brand: Kenwood Pages: 59
Kenwood K-525 Service Manual preview
K-525
Brand: Kenwood Pages: 36

Brands by name

Popular brands

Load more brands