Administering the WMIC
Protecting Access to Privileged EXEC Commands
6
Cisco 3200 Series Wireless MIC Software Configuration Guide
This section describes how to control access to the configuration file and privileged EXEC commands.
Default Password and Privilege Level Configuration
Table 2
shows the default password and privilege level configuration.
Setting or Changing a Static Enable Password
The enable password controls access to the privileged EXEC mode.
Note
The
no enable password
global configuration command removes the enable password, but you should
use extreme care when using this command. If you remove the enable password, you are locked out of
the EXEC mode.
Table 2
Default Password and Privilege Levels
Feature
Default Setting
Username and password
Default username is
Cisco
and the default password is
Cisco.
Enable password and privilege level
Default password is
Cisco
. The default is level 15 (privileged EXEC
level). The password is encrypted in the configuration file.
Enable secret password and privilege level
The default enable password is
Cisco
. The default is level 15 (privileged
EXEC level). The password is encrypted before it is written to the
configuration file.
Line password
Default password is
Cisco
. The password is encrypted in the configuration
file.
