WDS, Fast Secure Roaming, and Radio Management
Configuring WDS and Fast Secure Roaming
9
Cisco 3200 Series Wireless MIC Software Configuration Guide
Step 13
Select
CiscoSecure Database
from the Password Authentication drop-down menu.
Step 14
In the Password and Confirm Password fields, enter exactly the same password that you entered on the
access point on the Wireless Services AP page.
Step 15
Click
Submit
.
Step 16
Repeat
Step 10
through
Step 15
for each access point that uses the WDS access point.
Step 17
Browse to the System Configuration page, click
Service Control
, and restart ACS to apply your entries.
Figure 7
shows the System Configuration page.
Figure 7
ACS System Configuration Page
Using CLI Commands to Enable the WDS Server
The following command-line interface (CLI) commands are required to enable the WDS server. The
no
form of the commands disables the WDS server. The same configuration applies for Central WDS server
and per subnet WDS server. The same configuration applies to WMIC.
[no] wlccp wds priority <1-255> interface BVI1
[no] wlccp authentication-server infrastructure <method_infra>
where <method_infra> is <authentication server list name>
[no] wlccp authentication-server client [any | eap | leap | mac] <method_client>
where <method_ client > is <authentication server list name>
[no] aaa group server radius infra
[no] server <IP address of RADIUS server> auth-port <Port number> acct-port <Port
number>
[no] aaa group server radius client
[no] server <IP address of RADIUS server> auth-port <Port number> acct-port <Port
number>
[no] aaa authentication login <method_infra> group infra
where <method_infra> is <named authentication list>
