manualshive.com logo in svg

Cisco 3200 Series, Software Configuration Manual

The Siemens 3200 Series is a versatile and high-performance product designed to meet your needs. Find the user manual for this exceptional device with ease at our website, where you can download it for free. Unlock the full potential of your Siemens 3200 Series by accessing the manual at manualshive.com.

Share
Download
background image

Spanning Tree Protocol in a Wireless Environment

  Displaying Spanning-Tree Status

14

Book Title

Displaying Spanning-Tree Status

To display the spanning-tree status, use one or more of the privileged EXEC commands in 

Table 3

:

 

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and 
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and 
coincidental.

 

 

© 2008 Cisco Systems, Inc. All rights reserved.

Table 3

Commands for Displaying Spanning-Tree Status 

Command

Purpose

show spanning-tree

Displays information on your network’s spanning tree.

show spanning-tree blocked-ports

Displays a list of blocked ports on this bridge.

show spanning-tree bridge

Displays status and configuration of this bridge.

show spanning-tree active

Displays spanning-tree information on active interfaces only.

show spanning-tree root

Displays a detailed summary of information on the spanning-tree root.

show spanning-tree interface 

interface-id

Displays spanning-tree information for the specified interface.

show spanning-tree summary [totals]

Displays a summary of port states or displays the total lines of the STP state 
section.

CCVP, the Cisco logo, and Welcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is
a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco
Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS,
iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networkers,
Networking Academy, Network Registrar, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient,
and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. 

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (0711R)

Summary of Contents for 3200 Series



























































































































































































































































































































Reviews:

No comments

Related manuals for 3200 Series

Magnavox FW391C Manual preview
FW391C
Brand: Magnavox Pages: 26
Kramer KIT-Z100 Quick Start Manual preview
KIT-Z100
Brand: Kramer Pages: 4
MOBILUS mobiWAN User Manual preview
mobiWAN
Brand: MOBILUS Pages: 14
Carbide 3D Shapeoko XL Assembly Manual preview
Shapeoko XL
Brand: Carbide 3D Pages: 34
Alpha Technologies GSM Lift Watch Voice Installation And Programming Manual preview
GSM Lift Watch Voice
Brand: Alpha Technologies Pages: 68
FONESTAR SCF-250 Instruction Manual preview
SCF-250
Brand: FONESTAR Pages: 24
Mantracourt T24-RM1 User Manual preview
T24-RM1
Brand: Mantracourt Pages: 24
2VV AirGENIO Installation, Operation And Maintenance Manual preview
AirGENIO
Brand: 2VV Pages: 19
2VV AirGENIO Operation And Use preview
AirGENIO
Brand: 2VV Pages: 24
JVC RV-DP200 Instructions Manual preview
RV-DP200
Brand: JVC Pages: 62
Lenze L-force PROFINET E94AYCER Mounting Instructions preview
L-force PROFINET E94AYCER
Brand: Lenze Pages: 114
Brahler CDSVAN Operating Instructions Manual preview
CDSVAN
Brand: Brahler Pages: 32
Jensen CM9521 Owner'S Manual preview
CM9521
Brand: Jensen Pages: 17
Sharp CD-ES9 Service Manual preview
CD-ES9
Brand: Sharp Pages: 4
Sharp CD-M4000 Service Manual preview
CD-M4000
Brand: Sharp Pages: 54
Sharp CD-ES600V Service Manual preview
CD-ES600V
Brand: Sharp Pages: 20
Sharp CD-M4000W Service Manual preview
CD-M4000W
Brand: Sharp Pages: 68
Sharp CD-ES900 Operation Manual preview
CD-ES900
Brand: Sharp Pages: 36

Brands by name

Popular brands

Load more brands