-----
CVM-BDM supply network analyzer
-------- --- Page Nº 37
c.- Scale offset
:
Value of the parameter that we assign as the zero of the scale.
dA 1
OUTPUT D/A No.1
Zero
zero of the scale:
x.xxx
(
allows choosing the zero of the scale
(four digits with floating decimal point)
-
"
max
" key: it allows modifying the value of the blinking value. Every time it is
pressed the number is increased.
-
"
min
" key: it allows validating the blinking value and go to the next digit.
NOTE
: When you arrive at the last digit, you can move the position of the decimal
point with the "
max
" key.
-
"
display
": to validate the selected option and pass to the next setup screen.
d.- Full scale:
Value of the parameter to which we assign the 20 mA.
dA 1
OUTPUT D/A No.1
F.ESC
Full scale:
x.xxx
(
allows choosing the full scale (20 mA)
(four digits with floating decimal point)
Proceed as in the previous section.
- For passing to the next option, press "
display
": the setup for the second
output will appear (only with a CVM-BDM type CVM-BDM-420).
dA 2
OUTPUT D/A No.2
code
xxxx
Proceed as in the previous sections.
