Circutor AFQm Series, Instruction Manual

Page: 86 / 108

86
AFQm
Instruction Manual
To do this, go to the maintenance screen, via the configuration screen, by pressing the
key and entering the password to log into the maintenance screen ( Maintenance password :
8888).
The screen in
Figure 83
is displayed.
Checking the operation of the fans:
1�- Press the key , the fan starts to operate at a rotation speed of 50%; check that
it is working properly.
Press the key , to stop the fan.
2�- Press the key , the fan starts to operate at a rotation speed of 100%; check
that it is working properly.
Press the key
, to stop the fan.
Note: The fans will stop if the key is not pressed after 1 minute.
19 Reset the fans maintenance meter by pressing the key.
10.4.- CHANGE OF COOLING FANS: AFQm OF 60A
Table 41:Tools needed (AFQm-xxx-060M)
Tools needed
Fan assembly replacement
AFQm-xxx-060M, Code: 920122
2
Screwdriver for PH2 head screws
3
Screwdriver for
Allen 3
head screws
Figure 84: Location of the cooling fans�
To proceed to change the set of fans: