Circutor AFQm Series, Instruction Manual

Page: 58 / 108

58
AFQm
Instruction Manual
6.17.- DEVICE INFORMATION
In this screen,
Figure 58
, the serial number, HMI and DSP versions of the device are shown.
Figure 58: Device information�
The touch panel of the display is calibrated from factory, but depending on the installation con-
ditions, it may be necessary to recalibrate it.
It is recommended to use a soft tip pointer (take care not to damage the display) and press icon
. The calibration screen is shown below,
Figure 59
.
Figure 59: Calibrate touch sensor�
Note: You have accessed the calibration screen by accident, wait until the line that surrounds
the central circle is complete and you will be returned automatically to the information
screen of the device (
Figure 58
).
Use the and keys to navigate through the different display screens.