Circutor AFQm Series, Instruction Manual, Page: 82 / 108

82
AFQm
Instruction Manual
The points to be inspected are:
1�- Set the AFQm in STOP mode and open the main switch ( OFF position).
2�- Wait 1 minute for the capacitors to discharge.
3�-
Clean the ventilation grilles, removing the dust.
4�- Check the status and torque of the electrical connections, as well as the mechanical attach-
ment to the wall.
5�-
Reset the standard maintenance meter, to do so:
Access the main setup screen.
Figure 79: Main configuration screen.
Press the Edit key and enter the password used to access the maintenance screen
( Maintenance password: 8888 ).
The screen shown in
Figure 80
will be displayed.
Figure 80: Maintenance screen�
Press the key to reset the maintenance meter.