Circutor AFQm Series, Instruction Manual, Page: 65 / 108

65 Instruction Manual
AFQm
7.5.- HARMONICS SELECTION
Note:
This screen is not visible on the
“slave”
devices.
Note: The screen that appears if you have selected the operating mode FREQ: Frequency
mode
(“7.4.- WORKING MODE”)
The harmonics to be filtered are selected in this screen,
Figure 68
.
Figure 68: Configuration screen: Harmonic selection.
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration
values.
7.6.- OPERATING LIMITS
Note: This screen is not visible on the “slave” devices.
In this screen,
Figure 69
, the operating limits of the device are configured:
Figure 69: Configuration screen: Operating limits.