63
Instruction Manual
AFQevo
●
Type,
device range:
30A
: 30 A model.
100A
: 100 A model.
Press the
key to access the next configuration step
Press the
key to access the main screen of the device without saving the configuration
values.
7.3.- INSTALLED DEVICES
The type of device are configured in this screen,
Figure 66:
Configuration screen: Installed units
●
Type of device: Master / Single
/ Slave
The type of device is the first parameter that must be selected, with the following possible op
-
tions:
Single:
select this option if the
AFQevo
does not have filters connected in parallel.
Master:
select this option if the filter is going to be used as the “
master
” of a group of
devices in parallel.
Slave:
select this option if the device is going to be used as the “
slave
” of a group of
devices in parallel.
Once the device has been configured as the “
slave
”, the next configuration step is shown
in section “
Note :
The
and
/
keys are disabled in the slave devices.
Press the
key to access the next configuration step
Press the
key to access the main screen of the device without saving the configuration
values.
