55
Instruction Manual
AFQevo
Table 22 (Cont�) : Alarm messages�
Alarm messages
High temp Inductor
Description
The temperature of the inductors is very high.
Corrective
action
Check that the fans are working. Clean or replace the fans if necessary. If it continues,
contact
the Technical Assistance Service
Resonance
Description
Detection of a potential resonance with a load
Corrective
action
The resonance detection function can be activated erroneously in installations with a very high
voltage THD. Contact the Technical Assistance Service.
Initial Conditions
Description
The start-up conditions have not been met 10 times during the past 5 minutes.
Corrective
action
Check the configuration and the ambient temperature. Check the quality of the power supply
voltage. If it persists, contact the Technical Assistance Service
Internal communications
Description
Failure in internal communications.
Corrective
action
Restart. Contact the
TAS
.
Hardware failure
Description
The self-diagnostic system has detected a fault.
Corrective
action
Contact the
TAS
.
Exxx or Cxxx
Description
Internal error.
Corrective
action
Contact the Technical Assistance Service.
6.14.- WARNINGS
Note:
This screen is not visible on the “
slave
” devices.
When the device generates a warning, it will continue to operate, but the
symbol will be
displayed on the main screen.
On pressing the
key; if there are active warnings, the screen shown in
will be displayed and the user will be asked for confirmation to continue with the filter start-up
process.
Figure 54:
Confirm screen.
