CIRCONTROL, S.A.
– Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940
– Fax: +34 937 362 941
51
Web: www.circontrol.com
– E-mail:
WALLBOX SMART
– INSTRUCTION MANUAL
Picture bellow shows the aspect of the graph generated by the client software.
Graph tool has following sections:
Title:
Situated on the upper area. It is a text describing the represented
variables.
Representation areas:
Data represented by bars for energy or by lines for
power. Each area contains some common characteristics:
-
Key:
Provides general information about the variables that are
represented in the area.
-
Y-Axis:
Provides information on the units of the variables that are
represented in this axis and the range of values that are being
displayed.
-
X-axis:
Typically, this is the time axis and is located at the bottom of the
representation area. Here the time interval being represented may be
seen. Usually predefined time intervals are represented (day, month,
etc.). But the user can choose the most suitable as can be seen later.
