CIRCONTROL, S.A.
– Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940
– Fax: +34 937 362 941
3
Web: www.circontrol.com
– E-mail:
WALLBOX SMART
– INSTRUCTION MANUAL
1 INTRODUCTION
This manual contains all the information necessary for safe use of the electrical vehicle
charger and will help you get the best performance results from it.
This equipment incorporates the latest technology and offers the most advanced
service on the market in the area of EV chargers.
1.1
IMPORTANT SAFETY INFORMATION
Read all the instructions before using and install this product.
Do not use cables there are not in perfect conditions.
Do not use this unit for anything other than electric vehicle charging.
Do not modify this unit. If modified, Circontrol will reject all responsibility and the
warranty will be void.
Comply strictly with current safety regulations according to your country rules.
Do not make repairs or manipulations with the unit energised.
Only trained and qualified personnel should have access to low-voltage
electrical parts inside the device.
Check the installation annually by qualified technician.
Remove from service any item that has a fault that could be dangerous for
users (broken plugs, caps that don’t close...).
Use only original supplied spare parts.
Do not use this product if the enclosure or the EV connector is broken, cracked,
open, or shows any other indication of damage.
1.2
DESCRIPTION
Smart post charging solution is special designed to charge EV using standardized
MODE 1 and MODE 3 according to European standard IEC_61851-1.
