Circontrol CCL-WB MIX-SMART series Instruction Manual Download

Page: 56 / 62

CIRCONTROL, S.A.

– Innovació, 3 – 08232 – Viladecavalls (Barcelona)

Tel.: +34 937 362 940

– Fax: +34 937 362 941

Web: www.circontrol.com

– E-mail:

[email protected]

WALLBOX SMART

– INSTRUCTION MANUAL

Table toolbar has same options and functionality as explained on toolbar graphs

section.

9.5.1 TABLE PROPERTIES

It is possible to configure some aspects using the table

“

Properties

” option. This option

can be accessed using the “

Options

” menu, “

Properties

” submenu, or directly with the

“

Properties

” button on the main toolbar.

Table properties window

Using this option it is possible to add new variables to the table in the same way as

they are added to the graph, by clicking on

“

Add

”.

It is also possible to delete variables from the table selecting the desired variables and

clicking on the “

Delete

” button.

User can print the current graph displayed

using “

Print

” option on the “

Options

” menu of

the main menu or the

“

Print

” button of the upper toolbar.

Summary of Contents for CCL-WB MIX-SMART series































































Search results

Summary of Contents for CCL-WB MIX-SMART series

Reviews:

Related manuals for CCL-WB MIX-SMART series

Brands by name

Popular brands

Circontrol CCL-WB MIX-SMART series, Instruction Manual

Search results

Summary of Contents for CCL-WB MIX-SMART series

Reviews:

Related manuals for CCL-WB MIX-SMART series

Brands by name

Popular brands