CIRCONTROL, S.A.
– Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940
– Fax: +34 937 362 941
11
Web: www.circontrol.com
– E-mail:
WALLBOX SMART
– INSTRUCTION MANUAL
4 ETHERNET COMMUNICATIONS
Charge station can be configured and monitorized to establish owner preferences or
specific setup using integrated Ethernet communication port allocated in main
controller CCL1 device.
Once service PC is configured as bellow procedure and connection established with
the charge station, direct access to the device main setup page will be showed.
Charge station is shipped from the factory with default network settin
g of “
DHCP
enabled”.
It means that the charge station will try to obtain an IP address from a DHCP
server available on the network.
Step by step below guide detailed setup an IP address to the charging station in case
there is no DHCP server available on the network.
4.1
PREREQUISITES
Below table shows, hardware and software needed to setup and IP address to the
charge station.
Computer running one of the following
operating systems
-
Windows XP (x86)
-
Windows Vista (x86/x64)
-
Windows 7 (x86/x64)
-
Windows 8 (x86/x64)
Crossover Cable UTP Cat.5e or Cat6
Software needed:
IPSetup.exe.
(Supplied by Circontrol)
