Circontrol CCL-WB MIX-SMART series Instruction Manual Download Page 51

Page: 51 / 62

CIRCONTROL, S.A.

– Innovació, 3 – 08232 – Viladecavalls (Barcelona)

Tel.: +34 937 362 940

– Fax: +34 937 362 941

Web: www.circontrol.com

– E-mail:

[email protected]

WALLBOX SMART

– INSTRUCTION MANUAL

9.3

STATUS BAR

Status bar is located at the bottom of the client software and it contains general

information about status of CirCarLife Scada engine connected.

OVERVIEW

Status

Description

Online CirCarLife Scada engine and

working properly.

Offline CirCarLife Scada engine.

Incidences

Description

One or more devices are not

communicating.

See device status section to find witch

device is not communicating.

One or more devices are not reporting.

One or more events are active.



Double-click over icon showed to see details.

NOTE:

Status bar can be hidden using the "General” option in the client application menu. It

may also be hidden using the “Enable menu and toolbar” option in editor “Preferences”. In the

latter case it will not be possible to make it appear again from the client application.

Engine status

Engine name, IP and port

Incidences

Summary of Contents for CCL-WB MIX-SMART series































































Search results

Summary of Contents for CCL-WB MIX-SMART series

Reviews:

Related manuals for CCL-WB MIX-SMART series

Brands by name

Popular brands

Circontrol CCL-WB MIX-SMART series, Instruction Manual

Search results

Summary of Contents for CCL-WB MIX-SMART series

Reviews:

Related manuals for CCL-WB MIX-SMART series

Brands by name

Popular brands