Operations
MediaVault U320-R, U320-RX User Manual
5-16
MV U320-R, MV U320-RX_Ciprico Inc.
Changing the SCSI ID
Each SCSI device attached to a SCSI channel must have its own unique
ID setting. Valid ID for Wide SCSI are from 0 to 15.
Most SCSI host adapters inside your computer typically occupies ID 7. Do
not use the same SCSI ID as the host adaptor. If there are other SCSI
devices on the SCSI channel, ensure that none of the SCSI IDs are the
same.
If you are unsure which ID to use and the MV U320-R or MV U320-RX is
the only device attached to this particular channel of the host adapter, use
ID 15.
To change the value, use a pointy instrument (pointy pen) and press the
buttons just above and just below the number to change it. See Figure 5-5.
The MV U320-R or MV U320-RX must be turned off and back on again to
have the new SCSI ID setting take effect.
FIGURE 5-5.
SCSI ID Selection Buttons.
Press
to change
to change
Press
