Installation
MediaVault U320-R, U320-RX User Manual
4-12
MV U320-R, MV U320-RX_Ciprico Inc.
MV U320-RX
Multiple SCSI devices can be connected by a daisy chain, as indicated in
Figure 4-8
. Make the following connections:
• Run SCSI cables from the SCSI IN connectors of the MV U320-RX to
the SCSI connectors of the host computer.
• Run SCSI cables from the SCSI OUT connectors of the MV U320-RX to
the SCSI IN connectors of another unit (such as another MV U320-RX).
The other unit must have a terminator inserted in the unused SCSI
connector.
Keep in mind that all connected SCSI devices must be rated at, and
configured to, run at Ultra320 for maximum data transfer. Mixing slower
devices, such as Ultra2, Ultra Wide, narrow SCSI, etc., could reduce the
data transfer rate to the slowest device on the SCSI channel.
Make sure of the following:
• That the total SCSI cable length is as short as possible (a maximum of
12 meters).
• To use a terminator at the end device of each SCSI chain.
• That there is no duplicated connections or SCSI ID conflict on any SCSI
channel. For the MV U320-RX Max, use only Side A.