Maintenance
MediaVault U320-R, U320-RX User Manual
8-2
MV U320-R, MV U320-RX_Ciprico Inc.
Disk Drive Module Replacement
Removing, replacing, and rebuilding a disk drive module consists of four
inter-related procedures. Perform these four procedures in sequence:
1.
“Power-Off the Host Computer and MediaVault Unit” (see below)
2.
“Remove the Front Panel” (see
page 8-3
).
3.
“Remove the Disk Drive Module” (see
page 8-6
).
4.
“Install and Rebuild a Disk Drive Module”. Rebuild the disk drive
module, depending on whether the disk drive failed in RAID 0 mode
(see
page 8-8
) or RAID 3 mode (see
page 8-8
).
Power-Off the Host Computer and MediaVault Unit
Before removing and replacing any components from the MV U320-R or
MV U320-RX, perform the following:
1.
Power-off the host computer (PC or Macintosh).
2.
Power-off the MV U320-R, MV U320-RX.
