CipherLab 1664, User Manual

Page: 55 / 267

44
Enter Setup
1664 Barcode Scanner User Guide
1.14 PICKLIST MODE
Picklist mode enables the decoder to decode only the barcodes aligned under the center
of the laser aiming pattern.
Enable
*Disable
1.15 PAGER BEEP DURATION
Paging function is only activated when 1664 is in Power-Saving mode. 1664 can be
woken up via receiving any Bluetooth
®
status command by pressing a key on the host
keyboard. The buzzer will continuously sound two short high tone beeps until the power
key is pressed on the scanner or the timeout is reached, and the scanner re-enters
power saving mode.
By default, the pager beep duration is 5 seconds. Specify a value, ranging from 0 to 15.
(0~15 sec.; 0= Disable)
Bluetooth
®
HID profile: Press any one of the following keys “Scroll Lock”, “Number
Lock” or “Caps Lock” on the host computer to trigger the waking up of 1664.
Bluetooth
®
SPP Profile: Any command sent using Bluetooth
®
SPP will trigger the
waking up of 1664.
Pager Beep Duration
0~15 sec.
(*5 s)
1)
Read the barcode above to specify the desired beep active time.
2)
Read the “ Decimal Value ” barcode on page 251. For example, read “1” and “5” for the
pager beep function to be activated each 15 seconds after entering Power-Saving
mode.
3)
Read the “Validate” barcode on the same page to complete this setting.