CipherLab 1664 User Manual Download Page 165

Page: 165 / 267

154

Enter Setup

1664 Barcode Scanner

User Guide

4.21.4 UPC COMPOSITE MODE

UPC barcodes can be “linked” with a 2D barcode during transmission as if they were one

barcode.

UPC Never Linked

Transmit UPC barcodes regardless of whether a 2D barcode is detected.

UPC Always Linked

Transmit UPC barcodes and the 2D portion. If the 2D portion is not detected, the UPC

barcode will not be transmitted.

Note: CC-A/B or CC-C must be enabled!

Auto-discriminate UPC Composites

Transmit UPC barcodes as well as the 2D portion if present.

UPC Never Linked

*UPC Always Linked

Auto-discriminate

4.21.5 GS1-128 EMULATION MODE FOR UCC/EAN COMPOSITE CODES

Decide whether to transmit UCC/EAN Composite Code data as if it was encoded in
GS1-128 barcodes.

Enable GS1-128
Emulation Mode

*Disable

Summary of Contents for 1664












































































































































































































































































Search results

Summary of Contents for 1664

Reviews:

Related manuals for 1664

Brands by name

Popular brands

CipherLab 1664, User Manual

Search results

Summary of Contents for 1664

Reviews:

Related manuals for 1664

Brands by name

Popular brands