CipherLab 1664, User Manual

Page: 207 / 267

196
Enter Setup
1664 Barcode Scanner User Guide
79 (y) Chinese 25
5A (Z) N/A 7A (z) Aztec
5B ( [ ) GS1 DataBar (RSS) 7B ({) Micro QR
7C (|) USPS 4CB / One Code /
Intelligent Mail
7D (}) UPU FICS Postal
7E (~) UCC Coupon Extended Code
3)
Barcode Length setting – read the “ Decimal Value ” barcode on page 251 for the
4-digit length of the (first) barcode. For example, read “0065” for barcode length of
65 characters or read “0000” for any length.
Note: If not reading 0000 for any length, the 4-digit length must exclude prefix, suffix
(0x0d by default), length code, etc.
4)
Matching Character setting – read the “ Hexadecimal Value ” barcode on page 252 for
the 1
st
character that must be found matching in the (first) barcode. For example,
read “4” and “1” for matching character “A” as the first character in the barcode or
read “00” for any character.
5)
Read twice the “F” barcode on page 252 (“FF”) to complete the setting of each
barcode.
6)
Read the “Validate” barcode to end the editing of the barcode set.