Ciara ORION HF210-G5 User Manual Download Page 85

Page: 85 / 135

IPv4 Default Gateway:

Specify the static IPv4 default gateway for the selected channel.

Enable IPv6:

Check the box to enable the IPv6 for the selected channel.

Enable IPv6 DHCP:

Check the box to enable IPv6 DHCP support for the selected channel.

IPv6 Index:

Specify a static IPv6 Index to be configured for the selected channel. E.g.: 0

IPv6 Address:

Specify a static IPv6 address to be configured to the device for the selected channel. E.g.: 2004::2010

Subnet Prefix length:

Specify the subnet prefix length for the IPv6 settings.

Default Gateway:

Specify v6 default gateway for the IPv6 settings.

Enable VLAN:

Check the box to enable the VLAN support for selected interface.

VLAN ID:

The Identification for VLAN configuration.

VLAN Priority:

The priority for VLAN configuration.

Summary of Contents for ORION HF210-G5








































































































































Search results

Summary of Contents for ORION HF210-G5

Reviews:

Related manuals for ORION HF210-G5

Brands by name

Popular brands

Ciara ORION HF210-G5, User Manual

Search results

Summary of Contents for ORION HF210-G5

Reviews:

Related manuals for ORION HF210-G5

Brands by name

Popular brands