Ciara ORION HF210-G5 User Manual Download Page 84

Page: 84 / 135

28.7.6. Network Settings

This page is used to configure the network settings for the available LAN channels.

Network Settings Page

28.7.6.1 Network IP Settings

This page is used to configure the network IP settings.

Network IP Settings

Enable LAN:

Check the box to enable the selected channel.

LAN Interface:

Lists the available LAN interfaces.

MAC Address:

Displays the MAC Address of the device. This is a read-only field.

Enable IPv4:

Check the box to enable the IPv4 for the selected channel.

Enable IPv4 DHCP:

Check the box to enable IPv4 DHCP support for the selected channel.

IPv4 Address:

Specify the static IPv4 address for the selected channel.

IPv4 Subnet Mask:

Specify the static IPv4 subnet mask for the selected channel.

Summary of Contents for ORION HF210-G5








































































































































Search results

Summary of Contents for ORION HF210-G5

Reviews:

Related manuals for ORION HF210-G5

Brands by name

Popular brands

Ciara ORION HF210-G5, User Manual

Search results

Summary of Contents for ORION HF210-G5

Reviews:

Related manuals for ORION HF210-G5

Brands by name

Popular brands