53
Callback Center (Modem) Setup Screen
Figure 59 — Callback Center (Modem) Setup screen.
If you have a modem connected to the DVR, it can be set up to dial a pager with a numeric
message when an event occurs.
NOTE: The DVR will wait for at least one minute between pages. If another event occurs
less than one minute after the DVR has notified a pager, it will not dial the pager. It does
this so that the telephone line will not be tied up.
Highlight the box beside
Pager Number
and enter the telephone number of the pager. Enter the
number as it must be dialed from your telephone system; e.g., if you must dial “9” for an outside
line, enter “9” before the pager number.
Highlight the box beside
Mailbox
and enter the voice mailbox number if your pager uses a voice
mailbox.
Highlight the box beside
Site ID
and enter a three-digit site ID number.
When an event occurs, the DVR will dial the pager and leave a four-digit number. The first three
digits are the site ID number and the last digit is the type of event. For example, “0753” means
that Site 75 has lost video.
You can save your changes by highlighting
OK
and pressing the button. Selecting
Cancel
exits the screen without saving the changes.
