TVDR4 – 9 – 16H
38
You can set the amount of time to record prior to the event by adjusting the
Dwell
. You can set
the
Dwell
from 1 to 300 seconds.
NOTE: When the DVR is in the Time-Lapse mode, it ignores the pre-event settings and
follows the time-lapse settings.
Event Action Setup
Highlight the
Alarm In Event Action
,
Motion Detector Event Action
, or
Video Loss Event
Action
in the Main menu. The following
Event Action
setup screens will appear.
Alarm In Event Action (Record) Setup Screen
The DVR can be set to react to events differently. Each sensor can be assigned a schedule,
camera, recording speed, video quality and dwell time.
Figure 44 — Alarm In Event Action (Record) setup screen.
Highlight the
Sched
box and press the button. A schedule screen appears. Set the schedule
as described earlier.
Highlight the
Camera
box and press the button. A camera selection screen appears. Select
the camera number you would like to associate with the sensor.
NOTE: You can associate multiple cameras with a sensor.
Highlight the
Speed
box and select number of images per second you would like to record from
the drop-down menu.
