25
System Check Screen
Highlight
System Check
in the Main menu and press the button. The
System Check
setup
screen appears.
Figure 29 — System Check screen.
Highlight the box under the
On/Off
heading and press the button. This toggles between
On
and
Off
. When it is
On
, the DVR reports a fault condition if it does not detect any recording or if
there is an alarm during the designated time.
Highlight the box under the
Interval
heading and press the button. A slide bar appears
allowing you to set the check interval from 1 Hour to 30 Days by using the
Left
and
Right
arrow
buttons.
The
Status
field displays the fault conditions. When it is
Good
, there was recording or an alarm
occurred during the designated time. When it is
Bad
, there was no recording or no alarm
occurred during the designated time.
