Home
/
Chrysler
/
2011 Town & Country
/
Owner'S Manual

Chrysler 2011 Town & Country, Owner'S Manual, Page: 90 / 572

Share

Page: 90 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 90

Maintaining Your Air Bag System

WARNING!

•

Modifications to any part of the air bag system
could cause it to fail when you need it. You could
be injured if the air bag system is not there to
protect you. Do not modify the components or
wiring, including adding any kind of badges or
stickers to the steering wheel hub trim cover or the
upper right side of the instrument panel. Do not
modify the front bumper, vehicle body structure,
or add aftermarket side steps or running boards.

•

It is dangerous to try to repair any part of the air
bag system yourself. Be sure to tell anyone who
works on your vehicle that it has an air bag system.

(Continued)

WARNING! (Continued)

•

Do not attempt to modify any part of your air bag
system. The air bag may inflate accidentally or
may not function properly if modifications are
made. Take your vehicle to an authorized dealer
for any air bag system service. If your seat includ-
ing your trim cover and cushion needs to be
serviced in any way (including removal or
loosening/tightening of seat attachment bolts),
take the vehicle to your authorized dealer. Only
manufacturer approved seat accessories may be
used. If it is necessary to modify the air bag system
for persons with disabilities, contact your autho-
rized dealer.

88

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
88
89
90
91
92
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments