Chrysler 2011 Town & Country Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 79

NOTE:

These air bags are certified to the new Federal

regulations for Advanced Air Bags.

The Advanced Front Air Bags have a multistage inflator
design. This allows the air bag to have different rates of
inflation based on the severity and type of collision.

This vehicle may be equipped with driver and/or front
passenger seat track position sensors that may adjust the
inflation rate of the Advanced Front Air Bags based upon
seat position.

This vehicle is equipped with a driver and/or front
passenger seat belt buckle switch that detects whether
the driver or front passenger seat belt is fastened. The
seat belt buckle switch may adjust the inflation rate of the
Advanced Front Air Bags.

This vehicle is equipped with Supplemental Side Air Bag
Inflatable Curtains (SABIC) to protect the driver, front,
and rear passengers sitting next to a window. The SABIC
air bags are located above the side windows and their
covers are also labeled: SRS AIRBAG.

Advanced Front Air Bag And Knee Bolster Locations

1 — Driver And Passenger Ad-

vanced Front Air Bags

2 — Knee Bolster

3 — Supplemental Driver Side

Knee Air Bag

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

77

«
...
77
78
79
80
81
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments