Chrysler 2011 Town & Country Owner'S Manual Download Page 150

Page: 150 / 572

2. Return the head restraint to the upright position.

3. Pull up on the seatback recliner lever on the outboard
side of the seat to fold head rest and seatback and tumble
seat forward.

Easy Entry Second Row

The second row Stow ’n Go

威

seats allow easy entry to the

third row seat or rear cargo area.

Pull up on the seatback recliner lever on the outboard
side of the seat.

Raising The Head Restraint

Seatback Recliner Lever, Seat Tumble, And Head

Restraint Fold Lever

148

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Town & Country

Reviews:

Chrysler 2011 Town & Country, Owner'S Manual, Page: 150 / 572

Search results

Summary of Contents for 2011 Town & Country

Reviews: