Chrysler 2011 Town & Country Owner'S Manual Download Page 319

Page: 319 / 572

Every time a preset button is used, a corresponding
button number will display.

Buttons 1 - 6

These buttons tune the radio to the channels that you
commit to pushbutton memory (12 Satellite stations).

Operating Instructions (Uconnect™ Phone) —
If Equipped

Refer to “Uconnect™ Phone” in the Uconnect™ User
Manual located on the DVD for further details.

iPod

姞

/USB/MP3 CONTROL — IF EQUIPPED

NOTE:

This section is for sales code RES and REQ/

REL/RET radios only with Uconnect™. For sales code
RBZ/RHB, RHR, RHP, RHW or RB2 touch-screen radio
iPod

威

/USB/MP3 control feature, refer to the separate

RBZ/RHB, RHR, RHP, RHW or RB2 User’s Manual.
iPod

威

/USB/MP3 control is available only if equipped as

an option with these radios.

This feature allows an iPod

威

or external USB device to be

plugged into the USB port, located in the glove compart-
ment.

iPod

威

control supports Mini, 4G, Photo, Nano, 5G iPod

威

and iPhone

威

devices. Some iPod

威

software versions may

not fully support the iPod

威

control features. Please visit

Apple’s website for software updates.

NOTE:

•

If the radio has a USB port, refer to the appropriate
Uconnect™ Multimedia radio User’s Manual for
iPod

威

or external USB device support capability.

•

Connecting an iPod

威

or consumer electronic audio

device to the AUX port located in the radio faceplate,
plays media, but does not use the iPod

威

/MP3 control

feature to control the connected device.

UNDERSTANDING YOUR INSTRUMENT PANEL

317

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Town & Country

Reviews:

Chrysler 2011 Town & Country, Owner'S Manual, Page: 319 / 572

Search results

Summary of Contents for 2011 Town & Country

Reviews: