Chrysler 2011 Town & Country Owner'S Manual Download Page 80 | Manualshive

Page: 80 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 80

This vehicle is equipped with Supplemental Seat-
Mounted Side Air Bags (SAB) to provide enhanced
protection for an occupant during a side impact. The
SABs are located in the outboard side of the front seats.

NOTE:

•

Air Bag covers may not be obvious in the interior trim,
but they will open during air bag deployment.

•

After any accident, the vehicle should be taken to an
authorized dealer immediately.

Air Bag System Components

Your vehicle may be equipped with the following air bag
system components:

•

Occupant Restraint Controller (ORC)

•

Air Bag Warning Light

•

Steering Wheel and Column

•

Instrument Panel

•

Supplemental Driver Side Knee Air Bag

•

Knee Impact Bolster

•

Driver Advanced Front Air Bag

•

Passenger Advanced Front Air Bag

•

Supplemental Seat-Mounted Side Air Bags (SAB)

•

Supplemental Side Air Bag Inflatable Curtains
(SABIC)

•

Front and Side Impact Sensors

•

Front Seat Belt Pretensioners, Seat Belt Buckle Switch,
and Seat Track Position Sensors

•

Supplemental Active Head Restraint for Driver and
Front Passenger

78

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
78
79
80
81
82
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments