Home
/
Chrysler
/
2011 Town & Country
/
Owner'S Manual

Chrysler 2011 Town & Country, Owner'S Manual, Page: 142 / 572

Share

Page: 142 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 142

To raise the head restraint, pull upward on the head
restraint. To lower the head restraint, press the push
button, located at the base of the head restraint, and push
downward on the head restraint.

For comfort the Active Head Restraints can be tilted
forward and rearward. To tilt the head restraint closer to
the back of your head, pull outward on the bottom of the
head restraint. Push rearward on the bottom of the head
restraint to move the head restraint away from your
head.

Push Button

Active Head Restraint (Normal Position)

140

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
140
141
142
143
144
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments