Chrysler 2011 Town & Country Owner'S Manual Download Page 82 | Manualshive

Page: 82 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 82

Supplemental Seat-Mounted Side Air Bags (SAB)

Supplemental Seat-Mounted Side Air Bags may provide
enhanced protection to help protect an occupant during a
side impact. The Supplemental Seat-Mounted Side Air
Bag is marked with an air bag label sewn into the
outboard side of the front seats.

When the air bag deploys, it opens the seam between the
front and side of the seat’s trim cover. Each air bag
deploys independently; a left side impact deploys the left
air bag only and a right-side impact deploys the right air
bag only.

Supplemental Side Air Bag Inflatable Curtain
(SABIC)

SABIC air bags may offer side-impact and vehicle roll-
over protection to front and rear seat outboard occupants
in addition to that provided by the body structure. Each
air bag features inflated chambers placed adjacent to the
head of each outboard occupant that reduce the potential
for side-impact head injuries. The curtains deploy down-
ward, covering both windows on the impact side.

NOTE:

•

Should a vehicle rollover occur, the pretensioners
and/or SAB and SABIC air bags on both sides of the
vehicle may deploy.

Supplemental Seat-Mounted Side Air Bag Label

80

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
80
81
82
83
84
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments