Home
/
Chrysler
/
2011 Town & Country
/
Owner'S Manual

Chrysler 2011 Town & Country, Owner'S Manual, Page: 134 / 572

Share

Page: 134 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 134

Power Seats — If Equipped

Some models may be equipped with eight-way power seats
for the driver and front passenger. The power seat switches
are located on the outboard side of the seat. The switches
control the movement of the seat cushion and the seatback.

Adjusting The Seat Forward Or Rearward

The seat can be adjusted both forward and rearward.
Push the seat switch forward or rearward, the seat will
move in the direction of the switch. Release the switch
when you have reached the desired position.

Adjusting The Seat Up Or Down

The height of the seats can be adjusted up or down. Pull
upward or push downward on the seat switch, the seat
will move in the direction of the switch. Release the
switch when the desired position has been reached.

Tilting The Seat Up Or Down

The angle of the seat cushion can be adjusted in four
directions. Pull upward or push downward on the front
or rear of the seat switch, the front or rear of the seat
cushion will move in the direction of the switch. Release
the switch when the desired position has been reached.

Driver Power Seat Switch

1 — Seat Switch

2 — Seatback Switch

132

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
132
133
134
135
136
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments