Home
/
Chrysler
/
2011 Town & Country
/
Owner'S Manual

Chrysler 2011 Town & Country, Owner'S Manual, Page: 158 / 572

Share

Page: 158 / 572

Chrysler 2011 Town & Country Owner'S Manual Download Page 158

Release levers are located on the rear leg assemblies, near
the floor. To remove the seat, squeeze each release handle
and rotate downwards to deploy the wheels. A lock
indicator button pops up when the seat is unlocked. The
seat assembly can now be removed from the vehicle and
moved on its Easy Out

威

Rollers.

To reinstall the seat, align the seat into the detent posi-
tions on the floor. Squeeze the release handle and rotate
upward until the lock indicator button returns into the
handle.

WARNING!

If not properly latched, the bench seats could become
loose. Personal injuries could result. After reinstall-
ing these seats, be sure the red indicator button on
the release handles return into the handles.

Release Handles

156

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
156
157
158
159
160
...
»

Summary of Contents for 2011 Town & Country





























































































































































































































































































































































































































































































































































































Reviews:

No comments