Chroma 62000H Series, Operating & Programming Manual

Page: 27 / 236

Overview
1-11
Figure 1-5 Front Panel of 62020H-150S with Solar Array Simulation
Table 1-5 Description of Front Panel
Item Symbol Description
1 Display:
VFD Display: it shows the output settings and measured
result.
2
0
to
9
and
●
Numeric and Decimal Point:
Users can use the numeric keys and the decimal point
key to enter digital data.
3
VOLT
Voltage Setting Key:
Enters voltage setting mode. Users can use numeric
keys or voltage rotary knob ( ) to input voltage values
4 CURR
Current Setting Key:
Enters current limit setting mode. Users can use
numeric keys or current rotary knob ( ) to input current
limit values.
5 PROG
PROGRAM Key:
Press this key to skip to “Program Function Page” for
setting waveform editing mode.
6 LOCAL
LOCAL Key:
Press this key to switch the control mode from remote
control back to manual operating mode.
7
ENTER
ENTER Key:
Press this key to confirm the parameter settings.
8
DEL
Delete Key:
Press this key to delete the input value.
9
EXIT
EXIT Key:
Press this key to go to previous screen. If this key is
pressed before “
SAVE
” is pressed, the screen will go
back to “MAIN PAGE” and the data will not be saved.
10
LOCK
LOCK Key:
Press this key to lock all keys and rotary knob.
To unlock

press “ LOCK ” for 3 seconds to release it.
11
ON/OFF
ON/OFF Key:
Press this key to control the output to “ON” or “OFF”.
12
CONF
CONFIG Key:
Press this key to skip to “Config Choose Page” for setting
various functions.
13 SAVE
SAVE Key:
Press this key to save t
he settings in “Program and Config