67
Configuring input settings
Setting the timing detection mode
Set timing detection mode to enhanced or normal to support additional PC timings. When the
projected picture is not completed, this function is used to adjust the picture.
1. Select
Menu
>
Input Switching & PIP
>
Auto Image Resync
.
2. Select the appropriate mode:
•
Normal
—If the input signal source has been plugged to the same port on the projector
and not been replugged, the projector can process the signal at a faster speed.
•
Enhanced
—Every time the projector receives the signal, it analyzes the source signal
and verifies the integrity of it. This ensures the optimal image quality but consumes more
time.
3. To confirm the selection, press
ENTER
.
Setting the input searching method
Set the most suited method for searching input source.
1. Select
Menu
>
Input Switching & PIP
>
Input key
.
2. Select the appropriate searching method:
•
Change Sources
—Changes the source manually by pressing
INPUT
on the keypad or
remote control.
PBP, Main Right
*
PBP, Main Bottom
*
PIP, Sub Bottom Right
PIP, Sub Bottom Left
PIP, Sub Top Left
PIP, Sub Top Right
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
