53
Configuring system settings
Setting the AC power
Enable or disable to power on the projector directly.
1. Select
Menu
>
Configuration
>
Power Management
>
AC Power On
.
2. To toggle, press
ENTER
.
Setting the time for auto shutdown
Set up a time for automatically turns off the projector after no signal is detected for a preset
number of minutes. If an active signal is received before the projector powers down, the image is
displayed.
1. Select
Menu
>
Configuration
>
Power Management
>
Auto Shutdown
.
2. Select the appropriate time to automatically turn off the projector when there is no signal.
3. To confirm the selection, press
ENTER
.
Setting the sleep timer
Set up a time for automatically power off the projector, after it has been on for a specified amount
of time.
1. Select
Menu
>
Configuration
>
Power Management
>
Sleep Timer
.
2. Select the appropriate time to automatically turn off the projector.
3. To confirm the selection, press
ENTER
.
Enabling high altitude setting
Enable high altitude mode when altitudes >/= 2000 m. The fan operates at high speed to ensure
sufficient air flow for high altitudes; however, the noise level of the projector is increased.
1. Select
Menu
>
Configuration
>
High Altitude
.
2. To toggle, press
ENTER
.
Setting the projector communication
Enable the receivers and the wired keypad to communicate with the projector from the remote. The
front and top IR sensors receive transmissions from the IR remote. Keep the transmission path to
these sensors unobstructed for uninterrupted communications with the projector.
1. Select
Menu
>
Configuration
>
IR Control
.
2. To enable the top IR sensor, select
Top
.
3. To confirm the selection, press
ENTER
.
4. To enable the front IR sensor, select
Front
.
5. To confirm the selection, press
ENTER
.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
