50
Configuring system settings
Resetting the lens to home position
Set the lens offset back to the home position.
1. Select
Menu
>
Configuration
>
Lens Settings
>
Lens Calibration
.
You can also press
LENS
on keypad or
LENS H/LENS V
on remote control.
2. Press
ENTER
.
3. To start the lens calibration, select
OK
.
Selecting screen image orientation
Specify the orientation to use for the image. The projector supports front projection, rear
projection, front projection inverted, or rear projection inverted.
1. To invert the projection image, select
Menu
>
Configuration
>
Ceiling Mount
.
2. Select appropriate ceiling mount settings:
•
Off
—Disables the ceiling mount setting.
•
On
—Enables the ceiling mount setting.
•
Auto
—Detects the orientation automatically.
3. To confirm the image orientation, press
ENTER
.
4. To do a rear projection, select
Menu
>
Configuration
>
Rear Projection
.
5. To swap, press
ENTER
.
Adjusting on-screen display menus
Adjust various on-screen display (OSD) settings including the position, OSD transparency and
timing for OSD to disappear.
Determining the on-screen display position
Adjust the location of the on-screen display (OSD) menus.
1. Select
MENU
>
Configuration
>
Menu Preferences
>
Menu Horz Offset
or
Menu Vert
Offset
.
2. To determine the location on the screen where you want OSD to appear, adjust the slider by
arrow keys or press
ENTER
to input the value.
3. After inputting the value, press
ENTER
to apply.
To make sure the lens shift is functioning properly, Christie recommends to calibrate the lens every
time the lens are changed.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
