65
Configuring input
settings
Learn how to configure the input source and picture in picture (PIP)/picture by picture (PBP)
settings.
Setting main input source
Set up the active input to be used as the main image.
1. Select
Menu
>
Input Switching & PIP
>
Main Input
.
2. To select the active input, press
ENTER
.
Setting second input source
Select an active input to be used as the picture in picture (PIP)/picture by picture (PBP). Before
setting the second input source, make sure to enable PIP/PBP otherwise this item is disabled.
1. Select
Menu
>
Input Switching & PIP
>
PIP/PBP Input
.
2. To select another active input, press
ENTER
.
Enabling second input source
To activate the picture in picture (PIP)/picture by picture (PBP) setting, switch on this function.
1. Select
Menu
>
Input Switching & PIP
>
PIP/PBP Enable
.
2. To swap, press
ENTER
.
To update the PIP/PBP mode, run the
Input Switching & PIP
>
Auto Image Resync
function.
Auto Image Resync synchronizes the main input and the sub input sources simultaneously.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
