63
Diagnostic tools
Follow these procedures to help diagnose issues with GS Series 2K projectors.
Viewing projector information
View the status of the projector, source information, light source information, and communication
information. The information is read-only.
1. To view the status of the projector, such as model name, serial number, and so on, select
Menu
>
Information
>
Status Info
.
2. To view source information, such as active source, signal format, and so on, select
Menu
>
Information
>
Source Info
.
3. To view the communication information, such as network status, projector's IP address, subnet,
and so on, select
Menu
>
Information
>
Communications Info
.
4. To view the light source information, such as total projector hours and laser diode (LD) hours,
select
Menu
>
Information
>
Light Source Info
.
5. To view the firmware information, such as firmware (FW) version, F-MCU version, and so on,
select
Menu
>
Information
>
Firmware Version Info
.
Selecting a test pattern
Use the projector's test patterns to assist with configuration of the projector and to diagnose any
issues that may occur.
1. Select Test Pattern on remote control.
You can also select the test patterns from
Menu
>
Test Pattern
.
2. Scroll through the list of test patterns by left and right arrow keys on remote control.
3. Select the required test pattern.
4. To confirm your selection, press
ENTER
.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.