Projector covers
DHD410S Service Manual
48
020-001481-01 Rev. 1 (10-2018)
2. Remove the three M3 screws with a Phillips #1 screwdriver securing the left-side cover.
3. If required, replace the left-side cover.
4. To re-install, follow these steps in reverse order.
Removing the right-side cover
The right-side of the projector is determined by facing forward from rear of the projector.
1. Remove the top cover.
See
2. Remove the four M3 screws with a Phillips #1 screwdriver .
3. If required, replace the right-side cover.
4. To re-install, follow these steps in reverse order.
Removing the front cover
The front cover provides access to the lens assembly and front IR sensors.
1. Remove the top cover.
See
2. Remove the main board.
3. See
4. Remove the combiner module.
Summary of Contents for DHD410S
Page 1: ...Christie DHD410S Service Manual 020 001481 01...
Page 77: ......
