Optics
DHD410S Service Manual
64
020-001481-01 Rev. 1 (10-2018)
11. To release the DMD, rotate the lock screw counterclockwise by a Flathead screwdriver.
12. Replace the DMD.
When replacing the DMD module ensure that the new thermal pad is applied evenly.
13. To re-install, follow these steps in reverse order.
Replacing the combiner
module
To remove the combiner module, complete the following steps.
1. Remove the top cover.
2. Remove the main board.
3. Unplug one connector from laser driver board.
Replacing the combiner must be done in a clean room.
Summary of Contents for DHD410S
Page 1: ...Christie DHD410S Service Manual 020 001481 01...
Page 77: ......
